HRS S3 Series Isolation Base
Item #HRS:S3
Overview
The S3 Isolation Base is a highly innovative design that eliminates noise, revealing a new level of musical performance. It is manufactured from seven different materials including a proprietary resonance control stage with billet machined aircraft aluminum trim and a new plinth construction that increases plinth mass by 7 pounds, an additional 16 percent over the previous S1 Isolation Base design.
High Notes
Amazing Results On Most Low Level or Source Components
The S3 is a serious isolation platform that will greatly improve the sound of most preamps, DAC's, and especially turntables prone to feedback. It prevents almost all external vibrations from getting to your component
Engineered Isolation
The team at HRS has decades of experience in commercial isolation. They use a variety of materials and techniques to minimize the issues caused by external vibrations with astounding results
Custom Made and Future Proof
The S3 base comes in different sizes, but more importantly, is set up for the weight range of your component for ideal performance. But better yet, should you change components, it is a simple matter to change the feet for a different weight range.
The new 51 lb S3 (1921 size) plinth construction is manufactured by laminating in a vacuum press alternating layers of high density fabric reinforced resin and non magnetic stainless steel plates on both sides of a decoupled mass energy dissipation core system. The very top skin of the S3 plinth is the same high quality scratch resistant surface layer used in the R3X Isolation Base providing an identical cosmetic match. The S3 also uses the same primary isolation stage of the reference level M3X2 model and thus provides exceptional performance and a great performance value.
The broadband noise reduction system in the S3 is optimized to the weight of your component. The weight range can also be easily modified in the future to keep your system operating at peak performance. The low profile 3-inch high compact design also minimizes space requirements and keeps the visual focus of your system on the component. The S3 Isolation Bases can be used on any surface or audio stand and integrates directly into any of the HRS Audio Stand Frames. The S3 Isolation Base is produced in two standard sizes and is available in a black or silver finish. Each size can be purchased in any of the four different load ranges to optimize component performance.
If one of the standard sizes or load ranges does not fit your needs, HRS offers hundreds of custom designs in their M3X2 Isolation Base product line including custom designs for all large turntables and amplifiers.
Details & Specs
S3-1921
- B (BLACK)
- S (SILVER)
- DIMENSIONS:
- 19″ X 21″ X 3″ (48.3 X 53.3 X 7.6 CM)
- BASE WEIGHT: 51 LB (23.1 KG)
LOAD RANGE SUPPORTED EQUIPMENT WEIGHT LB (KG)
- ORANGE (OR) 0 – 25 LB (0 – 11.5 KG)
- RED (RD) 26 – 45 LB (11.6 – 20.6 KG)
- GREEN (GN) 46 – 85 LB (20.7 – 38.7 KG)
- BLUE (BL) 86 – 140 LB (38.8 – 63.5 KG)
S3-1719
- B (BLACK)
- S (SILVER)
- DIMENSIONS: 17″ X 19″ X 3″ (43.2 X 48.3 X 7.6 CM)
- BASE WEIGHT: 42 LB (19.1 KG)
LOAD RANGE SUPPORTED EQUIPMENT WEIGHT LB (KG)
- ORANGE (OR) 0 – 30 LB (0 – 13.8 KG)
- RED (RD) 31 – 50 LB (13.9 – 22.8 KG)
- GREEN (GN) 51 – 90 LB (22.9 – 41.0 KG)
- BLUE (BL) 91 – 145 LB (41.1 – 65.8 KG)
| Warranty | 5 years from the date of purchase when registered with HRS by mailing in the warranty card & copy of receipt within 14 days of the date of purchase. |
|---|
Related Videos & Articles