Can’t Hear Dialogue on Your Soundbar? Try These 7 Fixes
You’re watching a movie and someone says something important. You catch about half of it, look over at the person next to you, and get a shrug. So you back it up, play it again, and before long, the subtitles are on. We hear this all the time from soundbar owners, and there are seven things we’d check before buying a new bar.
How do you make dialogue clearer on a soundbar? Check that your bar is receiving a surround signal when you play a surround soundtrack. If voices sound muffled, move the bar forward and turn down the bass a step or two. If the words are clear but the action scenes are too loud, try Night Mode. Pick a scene you know, replay the same line after each adjustment, and change one thing at a time.
If your TV sends sound to your soundbar, look in the TV’s settings for Digital Audio Output, Digital Sound Out, or something similar. Start with Auto. If you’re using an external streaming player, check its audio settings too. We recommend Auto for both Apple TV 4K and Roku players. See our Apple TV 4K settings guide and Roku settings guide for the menu paths.
Play something with a 5.1 soundtrack and select that track if the app gives you a choice. If your surround-capable bar has an app or display that reports the incoming format and it still shows stereo, try Pass-Through on the TV if available, then check again. On a 5.1 soundtrack, most dialogue is typically mixed into the center channel. A stereo signal can still sound clear, but it carries the dialogue in the left and right channels.
If your soundbar is tucked back on a shelf or inside a cabinet, slide it forward until its front edge is roughly flush with the front of the console. This helps keep the shelf directly in front of the bar from reflecting sound back into the room, and it gives the front speakers a clearer path to where you sit. If your soundbar has upward- or side-firing speakers, give those drivers some breathing room, too. For more placement tips, see How to Optimize Your Soundbar.
It’s easy to turn up the subwoofer when you first set things up. It’s also easy to overdo it. If voices sound thick or you lose words whenever music or effects come in, lower the bass or subwoofer level by one or two steps in the soundbar’s app or on its remote. Replay the same line and listen for how easily you can follow the words. A small adjustment can be enough to keep the impact you like and make it easier to hear the conversation.
If voices are loud enough but the words run together, listen to the room. Bare floors, big windows, and hard walls can reflect sound and make speech harder to follow. Try closing the curtains or adding a rug if the floor is bare. Also try switching off the ceiling fan or replaying the scene once the dishwasher stops. It’s easy to miss how much steady background noise is covering up the quiet parts, particularly if you’re watching at a low volume.
If your soundbar has room calibration, run it after you’ve settled on placement. If you skipped it during setup or have moved the bar or changed the room since, it’s worth running now. Keep the room quiet and follow the prompts in the soundbar’s app or on-screen menu. Calibration can help balance a soundbar that sounds boomy or muffled in your room. If the room still sounds echoey, revisit the curtains and rug in step four. The name varies by model. Sonos calls it Trueplay, while the Sony BRAVIA Theater Bar 8 and Bar 9 run a sound field calibration through the BRAVIA Connect app. See our Sony BRAVIA Theater Bar 8 and Bar 9 review for an example.
While you’re in the app, see whether the soundbar lets you adjust the center-channel level separately. If it does, try raising it one or two steps. That raises everything mixed into the center channel, so try it on a second movie before keeping the setting.
Look for a dialogue setting in your soundbar’s app or on its remote. Start at the lowest level if yours offers multiple settings. A scene with music or effects underneath the conversation is a good test. Listen for easier-to-follow words and voices that still sound natural. Use the controls on the soundbar, since the TV’s own voice settings may only apply to its built-in speakers. For example, the Klipsch Flexus Core 200 gives you three levels of Dialogue Boost, and some Samsung bars call the setting Voice Enhance. Our best soundbars guide covers the Klipsch controls in more detail.
If you turn the volume up for the conversation and scramble to turn it down when the action starts, try Night Mode. It narrows the gap between quiet and loud sounds, which is especially useful when the kids are asleep. The Klipsch Flexus Core 200 has Night Mode in its app. If you watch through an Apple TV 4K, you can also use Reduce Loud Sounds in the player’s audio settings. Turn it off when you want the full impact of the soundtrack.
Try a few different movies and shows before settling on a setting. The sailboat scene in Tenet, where wind and water compete with the conversation, is a good example of a scene that can send you straight to the subtitles. If you’re having the same trouble with several shows and movies, take a closer look at placement and settings. You don’t need to rebuild your system around one soundtrack.
If dialogue is still hard to follow across several sources after you’ve tried these fixes, look for a soundbar with a dedicated center channel. On a surround soundtrack, that gives the dialogue its own speaker or set of drivers in the middle of the bar. When comparing models, listen to how clearly you can follow voices at the volume you normally use at home. Our soundbar buying guide walks through the features that make a difference.
If you have further questions, contact our experts via chat, phone, or email. Or simply visit one of our world-class showrooms to experience speakers, projectors, TVs, and everything in between for yourself before you make a purchase!
If you’re planning your home theater or media room, check out our Home Theater Design page, where we have everything Home Theater related, including our FREE Home Theater Design Tool.
When you buy from Audio Advice, you’re buying from a trusted seller since 1978. We offer Free Shipping, Lifetime Expert Support, and our Price Guarantee. We look forward to serving you!
A soundbar tucked into a cabinet, too much bass, or a room with lots of reflective surfaces can make words harder to follow. Start by moving the bar to the front of the console and lowering the bass or subwoofer level a step or two. Replay the same scene after each change.
Start with Auto on the TV. If you’re playing a confirmed 5.1 track and your surround-capable soundbar reports stereo, try Pass-Through if the TV offers it. Check the incoming format again after changing the setting.
Dialogue Mode makes speech easier to follow. Night Mode reduces the volume difference between quiet and loud sounds. Try Dialogue Mode when voices are hard to make out, or Night Mode when action scenes are much louder than conversation.
You'll be among the first to know about product launches, exclusive online deals, and the hottest audio trends.
