Klipsch Reference Premier III RP-8263FA

RP-8263FA Dolby Atmos Floorstanding Loudspeaker - Each

Klipsch Reference Premier III RP-8263FA

RP-8263FA Dolby Atmos Floorstanding Loudspeaker - Each
$1,299.99
Select Color:


Overview

Featuring dual 8 inch woofers and an integrated Dolby Atmos height channel, the Klipsch Reference Premiere Series III speaker offers 98 dB sensitivity and 600W peak power. An ideal solution for a clean sound system setup, housed in a braced MDF cabinet.

The Klipsch Reference Premiere Series III floor standing speaker features an integrated height channel designed and engineered in the USA. Built with an internally braced MDF knife edge cabinet supported by metal outrigger feet for precise angle adjustment, this multi channel speaker arrives in Ebony or Walnut finishes with copper details, dual chamber rear firing Tractrix ports, and a floating fabric grille.

The main channel utilizes a two way bass reflex design incorporating a 1 inch titanium LTS vented tweeter seated inside a flush mounted BMC axial Tractrix horn, alongside dual 8 inch Cerametallic cone woofers equipped with Faraday rings. Operating across a frequency response of 35 Hz to 25 kHz (+/- 3dB) with a crossover set at 1630 Hz, the main driver network achieves a 98 dB sensitivity rating and handles 150 watts continuous or 600 watts peak power at an 8 ohm impedance. Dual aluminum binding posts allow for bi wire or bi amp connections.

Built directly into the top of the enclosure, the height channel operates as an acoustic suspension system conforming to Dolby Atmos specifications. Driven by a 2 kHz crossover, it combines a 1 inch titanium LTS vented tweeter with a flush mounted BMC axial Tractrix horn and a 6.5 inch Cerametallic cone woofer using single aluminum binding posts. Standing 43.11 inches high, 10.84 inches wide, and 20.80 inches deep, this integrated cabinet simplifies any home cinema sound system setup.

Details & Specs

Model Reference Premier III RP-8263FA
Frequency Response 35–25kHz ±3dB
Sensitivity 98dB @ 2.83V / 1m*
Power Handling (Continuous / Peak) 150W / 600W
Impedance 8 Ohm (3.84 Ohm min @ 1.14kHz)
Crossover Frequency 1630Hz
High Frequency Driver 1" Titanium LTS Vented Tweeter with Flush Mount BMC Axial Tractrix® Horn
Low Frequency Driver Dual 8" Cerametallic Cone Woofers with Faraday Rings
Enclosure Material MDF (Internally Braced)
Enclosure Type Bass Reflex via Dual Chamber Rear-Firing Tractrix® Ports
Inputs Dual Aluminum Binding Posts / Bi-wire / Bi-amp
Height 43.11" (109.5 cm)
Width 10.84" (27.5 cm)
Depth 20.80" (52.8 cm)
Weight TBD
Finish Ebony, Walnut
Height Channel
Frequency Response Conforms to Dolby Atmos Specifications
Sensitivity Conforms to Dolby Atmos Specifications
Power Handling (Continuous / Peak) 100W / 400W
Impedance Conforms to Dolby Atmos Specifications
Crossover Frequency 2kHz
High Frequency Driver 1" Titanium LTS Vented Tweeter with Flush Mount BMC Axial Tractrix® Horn
Low Frequency Driver 6.5" Cerametallic Cone Woofer
Enclosure Material MDF
Enclosure Type Acoustic Suspension
Inputs Single Aluminum Binding Post

Reviews