Klipsch Reference Premier III RP-6203F

Floor Standing Loudspeaker - Each

Klipsch Reference Premier III RP-6203F

Floor Standing Loudspeaker - Each
$699.99
Select Color:


Overview

Featuring dual 6.5 inch Cerametallic woofers and a 1 inch titanium Tractrix horn tweeter, the Klipsch RP-6203F tower speaker delivers 96 dB sensitivity and 500W peak power. An ideal choice for an immersive sound system setup in an internally braced MDF cabinet.

The Klipsch Reference Premiere III RP6203F is a floor standing loudspeaker built for two channel music or home theater systems. Its MDF cabinet is internally braced for strength and uses a knife edge design. Metal outrigger feet make it easy to adjust the angle for better placement. The speaker comes in Ebony or Walnut with copper accents, a floating fabric grille, and a new input panel.

A 1 inch titanium LTS vented tweeter sits in a flush mounted BMC axial Tractrix horn. This setup helps keep high frequencies clear and spreads sound evenly across the room. Dual 6.5 inch copper colored Cerametallic cone woofers handle the lower range. Faraday rings and a bass reflex system with dual chamber rear firing Tractrix ports help produce deeper bass and reduce distortion.

The RP6203F covers a frequency range from 38 Hz to 25 kHz with a crossover at 1770 Hz. It has a sensitivity of 96 dB and can handle 125 watts of continuous power or up to 500 watts at peak. The nominal impedance is 8 ohms, dropping to 3.5 ohms at 180 Hz. Dual binding posts support bi wire or bi amp setups. With a height of 39.60 inches, a width of 9.29 inches, and a depth of 17.57 inches, the speaker fits well into most multi channel surround sound systems.

Details & Specs

Model Reference Premier III RP-6203F
Frequency Response 38-25kHz +/- 3dB
Sensitivity 96dB @ 2.83V / 1m*
Power Handling (Cont/Peak) 125W / 500W
Impedance 8 ohm (3.5 min @180Hz)
Crossover Frequency 1770Hz
High Frequency Driver 1” Titanium LTS Vented Tweeter with Flush Mount BMC Axial Tractrix® Horn
Low Frequency Driver Dual 6.5” Cerametallic Cone Woofers with Faraday rings
Enclosure Material MDF (Internally Braced)
Enclosure Type Bass Reflex via dual chamber rear-firing Tractrix® Ports
Inputs Dual binding posts / bi-wire / bi-amp
Height 39.60" (100.6 cm)
Width 9.29" (23.6 cm)
Depth 17.57" (44.6 cm)
Weight TBD
Finish Ebony, Walnut

Reviews