Klipsch Reference Premier III RP-5403C

Center Speaker - Each

Klipsch Reference Premier III RP-5403C

Center Speaker - Each
$449.00
Select Color:

Contact Us

Overview

Built with quad 5.25 inch Cerametallic woofers and a 1 inch titanium Tractrix horn tweeter, the Klipsch RP-5403C center speaker delivers 96 dB sensitivity and 600W peak power. An optimal center channel choice for a home cinema sound system setup.

The Klipsch Reference Premiere III RP-5403C center speaker is built for multi channel home cinema systems where clear vocal presence is important. Its MDF cabinet uses internal bracing for strength and includes an angle screw that helps with tilt adjustment during installation. The cabinet comes with copper accents, a fabric grille that appears to float in front of the drivers, and rear Tractrix ports. Both Ebony and Walnut finishes are available.

A 1 inch titanium LTS vented tweeter sits inside a flush mounted Tractrix horn. This setup helps keep high frequencies clear and reduces unwanted cabinet resonance, so sound stays consistent even when listening from different spots in the room. Four 5.25 inch Cerametallic cone woofers handle midrange and bass. Faraday rings are used to keep distortion low. The speaker uses a two way bass reflex design.

The RP-5403C covers a frequency range from 50 Hz to 25 kHz with crossover points at 650 Hz and 1950 Hz. It is rated at 96 dB sensitivity and can handle up to 150 watts of continuous power or 600 watts at peak, with an 8 ohm nominal impedance. One set of aluminum binding posts is used for connections. The cabinet measures 6.87 inches high, 32.06 inches wide, and 15.08 inches deep, making it a practical choice as a center channel in a surround sound system.

Details & Specs

Model Reference Premier III RP-5403C
Frequency Response 50-25kHz +/- 3dB
Sensitivity 96dB @ 2.83V / 1m*
Power Handling (Cont/Peak) 150W / 600W
Impedance 8 ohm (3.4 min @210Hz)
Crossover Frequency 650Hz / 1950Hz
High Frequency Driver 1” Titanium LTS Vented Tweeter with Flush Mount BMC Axial Tractrix® Horn
Low Frequency Driver Quad 5.25” Cerametallic Cone Woofers with Faraday rings
Enclosure Material MDF (Internally Braced)
Enclosure Type Bass Reflex via rear-firing Tractrix® Port
Inputs Single aluminum binding posts
Height 6.87” (17.4 cm)
Width 32.06” (81.4 cm)
Depth 15.08” (38.3 cm)
Weight TBD
Finish Ebony, Walnut
Accessories Angle screw

Reviews