Klipsch Reference Premier III RP-5103SA

Dolby Atmos Surround Speaker - Pair

Klipsch Reference Premier III RP-5103SA

Dolby Atmos Surround Speaker - Pair
$649.99
Select Color:


Overview

Built with a 1 inch titanium Tractrix horn tweeter and a 5.25 inch Cerametallic woofer, Klipsch RP-5103SA Atmos toppers handle 300W peak power. An optimal choice for expanding an immersive sound system setup in a sealed MDF cabinet.

The Klipsch Reference Premiere III RP-5103SA speakers function as either Dolby Atmos toppers or surround speakers, adding overhead audio channels to home theater setups. Designed in the USA, the internally braced MDF knife edge cabinet features a sealed enclosure for stable placement directly on top of floor standing or bookshelf speakers. Each pair includes eight rubber feet, iconic copper accents, a floating fabric grille, and an updated input panel, available in Ebony or Walnut finishes.

High frequency detail passes through a 1 inch titanium LTS vented tweeter mounted inside a flush mounted BMC axial Tractrix horn. This horn design limits cabinet resonance, minimizes wave breakup, and broadens off axis coverage. Midrange and low frequencies are handled by a 5.25 inch copper hued Cerametallic cone woofer equipped with Faraday rings within a two way driver array.

Acoustically tuned to match room reflective standards, the frequency response, sensitivity, and crossover points all conform to official Dolby Atmos specifications. The electrical system handles 75 watts continuous or 300 watts peak power at an 8 ohm nominal impedance, dropping to a 3.2 ohm minimum at 217 Hz. Single binding posts manage the wiring connections. Measuring 8.53 inches high, 6.81 inches wide, and 12.60 inches deep, these toppers integrate easily into a multi channel sound system setup.

Details & Specs

Model Reference Premier III RP-5103SA
Frequency Response Conforms to Dolby Atmos Specifications
Sensitivity Conforms to Dolby Atmos Specifications
Power Handling (Cont/Peak) 75W / 300W
Impedance 8 ohm (3.2 min @217Hz)
Crossover Frequency Conforms to Dolby Atmos Specifications
High Frequency Driver 1” Titanium LTS Vented Tweeter with Flush Mount BMC Axial Tractrix® Horn
Low Frequency Driver 5.25” Cerametallic Cone Woofer with Faraday rings
Enclosure Material MDF (Internally Braced)
Enclosure Type Sealed
Inputs Single Binding Posts
Height 8.53” (21.7 cm)
Width 6.81” (17.3 cm)
Depth 12.60” (32 cm)
Weight TBD
Finish Ebony, Walnut
Accessories Rubber Feet (8)

Reviews