Anthem STR Integrated Amplifier

Stereo Integrated Amplifier w/ Built-In DAC & Anthem Room Correction

Item #ANTHEM:STR-INT
Anthem

Anthem STR Integrated Amplifier

Stereo Integrated Amplifier w/ Built-In DAC & Anthem Room Correction

In Stock - Free 2-Day Shipping!
Details
OR
Add to Wish List
  • Free Shipping Icon Free Shipping
  • 30-Day Returns Icon 30-Day Returns
  • Expert Advice Icon Expert Advice
  • Price Guarantee Icon Price Guarantee
Overview

The revolutionary new STR Integrated Amplifier is based on an entirely new platform. It gives you more control and more power, with more connection options and more advanced technology, in a single, easy-to-use component. It combines the benefits of an advanced pre-amp with the power of a massive amplifier and processor, as well as functions like leading-edge DAC, onboard Anthem Room Correction, customizable bass manager for mono or stereo sub outs, MM and MC phono inputs – far more features than the average integrated amp. And count on Anthem’s digital signal processing innovations to deliver a noticeably higher level of performance realism. The new STR Integrated Amplifier drives all of your entertainment options today, and tomorrow.

  • High-resolution preamplifier section
  • High current, high output amplifier section Amplifier uses 8 bipolar output devices per channel, a toroidal transformer power supply, and Advanced Load Monitoring for 200W at 8 ohms, 400W at 4 ohms, 550W at 2 ohms, all continuous
  • Anthem Room Correction to optimize in-room response
  • Bass management for two subwoofers, in mono or stereo
  • Up-sampling of lower-resolution sources to 24-bit / 192 kHz
  • Asynchronous USB Audio Input supports 32-bit / 384 kHz PCM, and DSD 2.8 / 5.6 MHz sources
  • S/PDIF coaxial and optical, and balanced AES/EBU inputs
  • MM and MC phono, balanced XLR, and single-ended analog inputs
  • Analog Direct mode
  • Graphic Front Panel Display for easy setup navigation
  • Controllable via Ethernet, RS-232, or supplied IR remote
Details & Specs
PHONO PREAMPLIFIER
The phono preamplifier is suitable for moving magnet and high-output moving coil cartridges
Input Impedance 100 Ω (MC), 47 kΩ (MM)
Input Capacitance 270 pF (MM)
Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz) 3.6 mV (MC), 37.7 mV (MM)
Gain (default at 1 kHz, user adjustable ± 20 dB) 55 dB (MC), 35 dB (MM)
RIAA Response ± 0.1 dB (20 Hz to 20 kHz)
THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) 0.008% (MC), 0.005% (MM)
S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) 82 dB (MC), 96 dB (MM)
PREAMPLIFIER
Frequency Response  
digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB)
digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB)
digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00, -0.03 dB)
analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB)
analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB)
THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)  
digital-in, 44.1 kHz, 0 dBFS 0.0008%
analog-in, DSP mode, 1 Vrms input 0.001%
analog-in, direct mode, 1 Vrms input 0.0020%
SNR (at 1 kHz, IEC-A, 2 Vrms output)  
digital-in, 44.1 kHz, 0 dBFS 112 dB
analog-in, DSP mode, 2 Vrms input 110 dB
analog-in, direct mode, 2 Vrms input 120 dB
Maximum Output (<0.1% THD) 2.2 Vrms except analog-direct 3.3 Vrms
XLR Configuration Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted
More Information
Total Harmonic Distortion 0.002% (1 kHz), 0.015% (20 kHz)
Signal To Noise Ratio 114 dB
Frequency Response ± 0.1 dB
Gain 55 dB (MC), 35 dB (MM)
Impedance 100 Ω (MC), 47 kΩ || 270 pF (MM)
Max Power Consumption 500 W
Power Requirements In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
Customer Reviews
0%
Write Your Own Review
You're reviewing:Anthem STR Integrated Amplifier
Your Rating
Related Videos & Articles
Wishlist
Copyright © 2024 Audio Advice. All rights reserved.