SVS SoundPath Tri-Band Wireless Audio Adapter
Wirelessly connect your subwoofer, powered speakers, amplifiers, and more. Tri-Band switching technology is ideal in congested wireless signal areas where single-band wireless transmitters are prone to interference. Transmits a pristine, full-range stereo audio signal up to 130-feet at CD-quality (16-bit/48KHz) with ultra-low latency. Setup of the SoundPath Tri-Band Wireless Audio Adapter takes minutes. Once installed, it auto-switches between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands for uninterrupted audio signal transfer. Impervious to interference from Bluetooth, dual-band Wi-Fi routers, wireless security systems, cameras, and other wireless devices.
Auto-switches between 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. Highly resistant to interference from Wi-Fi-based security cameras, routers, smart TVs, and other wireless devices.
Uncompromised Sound Quality
Passes pristine, CD-quality (16-bit/48KHz) audio signal up to 130 feet with no noticeable delay.
Eliminates Audio Cable Clutter
Streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.
True Stereo Signal
Left/Right stereo signal transfer unlocks wireless connectivity for one or more subwoofers, 2-channel zone of powered speakers, amplifiers, powered surround speakers, and more.
Full-Range Wireless Connectivity
Transmits the complete audible frequency spectrum (6Hz to 20 kHz, +/ - 0.5 dB), providing a full-range wireless audio solution for subwoofers, powered speakers, amplifiers, and more. Great for adding additional zones to create a single-source multi-zone audio system.
Expands Placement Options
Adds wireless connectivity, giving you more flexibility when placing subwoofer s, powered speakers, and other audio components in a room. All without sacrificing performance.
Quick and Easy 3-Minute Setup
The transmitter and receiver come pre-paired, and setup takes only minutes:
- Connect the transmitter to an AV receiver, TV, or another audio source via RCA
- Connect the receiver to a subwoofer, powered speaker, power amplifier, or other line-level devices
- Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source)
- Wait a few seconds for the adapters to sync and you’re ready
- Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers
Frequency Response - 6Hz – 20 kHz +/ - 0.5 dB
Operating Frequencies - 2.4 GHz, 5.2GHz, 5.8 GHz
Transmission Range - 130 feet (line of site)
Latency - <19 microseconds
You might also like...
Transparent Basic Separate Biwire Adapter - Set of 4Regular Price $75.00 $75.00
Sonos 10W USB Power AdapterRegular Price $19.00 $19.00
Sonos Roam Wireless ChargerRegular Price $49.00 $49.00