Pro-Ject Phono Box MM
Moving Magnet Phono Preamp
The Pro-Ject Phono Box MM is a cost-effective way to interface a turntable to a preamplifier, integrated amplifier or receiver that provides only line-level inputs. Low noise, low distortion and a flat RIAA equalization curve with 32dB gain for moving magnet cartridges. An outboard power supply is included.
High Notes
Dual Mono Circuitry
With a separate circuit for each channel, you’ll get great stereo separation.
Low Noise
With it’s well-shielded case and low noise circuitry, the MM will not add noise to the signal.
Small Form Factor
The Pro-Ject MM is tiny with a separate power supply which allows you to locate it right behind your turntable in most cases.
The Pro-Ject Phono Box MM is a cost effective way to interface a turntable to a preamplifier, integrated amplifier or receiver that provides only line-level inputs. Low noise, low distortion and a flat RIAA equalization curve with 32dB gain for moving magnet cartridges. An outboard power supply is included.
- Metal case shields the electronics from vibrational and electromagnetic interference
- Special low-noise ICs used
- Optimal channel separation through dual-mono circuitry
- Gold plated RCA connection sockets
- DC power supply (< 1 watt standby power)
- Amplification and RIAA equalization for MM cartridges
- Small size allows installation close to record player
UPC | 9120035827166 |
---|---|
Inputs | 1 pair RCA/phono sockets |
Outputs | 1 pair RCA/phono sockets |
Total Harmonic Distortion | <0,04% |
Gain | 40 dB |
Noise Floor (MM) | 88 dB (A weighted) |
Output Voltage | 500 mV / 1 kHz at 5 mV /1 kHz |
Power Requirements | 18 V / 500 mA DC, suitable for your country's mains supply |