C 368 Hybrid Digital DAC Amplifier
The C 368 features an optional BluOS module to connect to your network and allow control from your smartphone, tablet, or desktop. Or, connect through Bluetooth to give you the ability to stream wirelessly. Also includes an MM Phono stage with precisely accurate RIAA equalization, high overload margins, extremely low noise, and an innovative circuit to suppress infrasonic noise that is present on all LPs.
Free 2-Day ShippingLearn More
What a Great Amp!
You could not ask for more in today's world for under $1000. The C368 has 80 watts per channel of real NAD power and a gaggle of inputs and outputs for just about any audio system. Four digital, two analog, an MM phono stage, headphone jack, two sets of speaker outs, and a subwoofer or preamp out section. Plus it is Bluetooth enabled. Couple all this with NAD's legendary great sound and you have a real winner!
NAD invented MDC which are slots on the back of some of their products to accommodate upgrades and additional source inputs. Add their new Bluesound MDC card and enter the Bluesound ecosystem of great Hi Resolution Audio streaming! There are other cards too for HDMI inputs, even more digital inputs, and more.
Control For Today's World
Control the C368 the old fashioned way from the front panel or use the cool NAD app for Android and IOS. You will have full control from the app of all of this amps great features!
- Connect using Bluetooth to allow streaming music from any Bluetooth-enabled device.
- The C 368 power supply is capable of 200 watts continuously and over 600 watts instantaneously to allow for short-term musical transients.
- Features RCA preamp output for connecting a separate amplifier or powered subwoofer.
|Signal To Noise Ratio||> 98 dB (A-weighted, 500mV input ref. 1W out in 8 Ohms)|
|Frequency Response||A+- 0.3 dB (20Hz - 6.5kHz)|
|Inputs||4 digital audio inputs, 3 stereo RCA audio inputs, including a phono input|
|Roon Status||Roon Ready|
Write Your Own Review