JBL Synthesis SCL-3
2-Way 5.25" In-Wall & In-Ceiling Speaker
The two-way SCL in-wall loudspeakers are the first flush-mount compression driver loudspeakers using JBL Professional technology. The dual 5-¼" cast frame aluminum woofers are ideal for in-wall or ceiling mounting. Utilizing the D2-derived 1-inch / 25mm annular ring compression driver with Teonex® diaphragm and an advanced HDI geometry horn, the SCL-3 provides unparalleled performance compared to any in-wall loudspeaker in the market today.
Sold individually.
The JBL brand has become synonymous with the cinema experience. The SCL-3 was designed to continue this legacy. The two-way SCL in-wall loudspeakers are the first flush-mount compression driver loudspeakers using JBL Professional technology. The dual 5-¼" cast frame aluminum woofers are ideal for in-wall or ceiling mounting. Utilizing the D2-derived 1-inch / 25mm annular ring compression driver with Teonex® diaphragm and an advanced HDI geometry horn, the SCL-3 provides unparalleled performance compared to any in-wall loudspeaker in the market today.
Features
- Dual 5-¼" (130mm) cast-frame, advanced aluminum matrix cone woofers with low-distortion neodymium motor structures
- D2-derived 1" (25mm) 2409H annular ring, Teonex ® diaphragm, compression driver
- Patented HDI™ (High-Definition Imaging) technology provides elevated performance in combination with patented D2-Series compression driver
- Design can be oriented in any of the four possible directions for flexibility in applications as an in-wall surround, in-wall LCR, or in-ceiling overhead height channel
- Ideal for overhead channel flush-mount for Dolby Atmos or similar
- Immersive surround sound installations
- Patent Pending extended range L-Bracket mounting system
- Zero-bezel, magnetically-attached grille
- Dual binding post inputs for bi-wire or bi-amplified connections
- Low resonance, well-damped MDF wood rear enclosures
- Unique center mounting point to aid installation and greatly minimize baffle resonances
- High-performance passive network utilizing all air-core inductors, polypropylene capacitors
General Specifications
- Speaker Type - Two-way In-Wall Loudspeaker
- Low-Frequency Transducer - Dual 5-¼” (130mm) cast-frame, advanced aluminum matrix cone woofers
- Mid/High-Frequency Transducer - D2-derived 1" (25mm) 2409H annular ring, Teonex® diaphragm compression driver
- Maximum Recommended Amplifier Power - 200 watts RMS
- Frequency Response (-6dB on-axis) - 65 Hz – 33KHz
- Coverage area (-6dB @ 20 KHz) - 90 x 60 deg, (-6dB @ 10 KHz) 110 x 90 deg (Hor. x Vert.)
- Sensitivity (2.83V@1m) - 91dB
- Nominal Impedance - 6 Ohm
- Crossover Frequencies - 1.3 KHz
- Enclosure type - Sealed In-Wall Mount with included back box
- Inputs - Dual Gold-plated Five-way Binding Posts
- Dimensions (H x W x D) - 16.46" x 16.46" x 6.01" (418mm x 418mm x 153mm)
- Weight - 24.3 lb (11.02 kg)
Warranty | 5 Years |
---|