HRS E1 Isolation Base
Item #HRS:E1
Overview
The E1 Isolation Base is a highly innovative design that eliminates noise, revealing a new level of musical performance. It is manufactured from four different materials including a proprietary resonance control stage, billet machined aircraft-quality aluminum front trim and a new HRS constrained layer damping resin composite plinth. The E1 load range is matched to the component weight for maximum performance using the same technology found in very high-performance reference level designs.
High Notes
Amazing Results On Most Turntables
We have found the E1 base to offer big improvements for most turntables. If you have any acoustic feedback issues with your turntable, the E1 will typically make them all completely disappear!
Engineered Isolation
The team at HRS has decades of experience in commercial isolation. They use a variety of materials and techniques to minimize the issues caused by external vibrations with astounding results
Custom Made and Future Proof
The E1 base comes in different sizes, but more importantly is set up for the weight range of your component for ideal performance. But better yet, should you change components, it is a simple matter to change the feet for a different weight range.
The E1 Isolation Base is produced in two standard sizes and is available in a black or silver finish. All surfaces on the Black finish are black, all surfaces on the Silver finish are silver except right, left and rear edge surfaces. Each size can be purchased in any of the four different load ranges to optimize component performance.
The broadband noise reduction system in the E1 maximizes performance and is highly effective on a wide range of surfaces and structures. The low profile compact design also minimizes space requirements. The E1 Isolation Bases Integrate directly into the HRS audio stand frames. (E1-1719, E1-1921 sizes)
- The zero surface interface to the outside world minimizes surface area contact and energy transfer to the isolation stage.
- Billet machined aluminum front trim.
- Innovative HRS design allows complete adjustment in load capacity and distribution to adapt to any future changes made to the system.
- Six degrees of freedom isolation stage preventing the transfer of energy to the component in every mechanical axis with equal capability.
- Proprietary HRS constrained layer dampening plinth system.
- Custom pressed resin fabric composite top and bottom plates.
Details & Specs
Model E1 - 1719
| Load Range | Supported Weight |
| Yellow (YL) | 0-35 lb. |
| Red (RD) | 36-60 lb. |
| Green (GN) | 61-100 lb. |
| Blue (BL) | 101-155 lb. |
Model E1 - 1921
| Load Range | Supported Weight |
| Yellow (YL) | 0-30 lb. |
| Red (RD) | 31-55 lb. |
| Green (GN) | 56-95 lb. |
| Blue (BL) | 96-150 lb. |
| Warranty | 5 years from the date of purchase when registered with HRS by mailing in the warranty card & copy of receipt within 14 days of the date of purchase. |
|---|
Related Videos & Articles